Wasp WWS750 How-To Guide

Portal > Knowledgebase > Hardware > WWS650 & WWS750 scanner: how to link (pair) to
base
WWS650 & WWS750 scanner: how to link (pair) to base
Scott Kircher - 2020-08-07 - in Hardware
If needed, user manuals can be downloaded from the article linked below in Related Pages.
To link (pair) the scanner to the base, use only the following instructions, which are from
Page 10 of the scanner's QRG (Quick Reference Guide):

Wasp WWS750 Specifications

General

Sensor type	LED
Scanner type	1D/2D
Yaw reading angle	-40 - 40 °
Tilt reading angle	0 - 360 °
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, PDF417
Optical sensor resolution (W x H)	864 x 544 pixels
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, GS1 DataBar Expanded Stacked, GS1 DataBar Stacked Omnidirectional, Han Xin, MaxiCode, Micro QR Code, MicroPDF417, PDF417, QR Code
PC connection	USB 3.2 Gen 1 (3.1 Gen 1)
Wireless range	90 m
Bluetooth version	3.0+HS
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Certification	R.E.A.C.H. , WEEE
Product color	Black, Grey, Yellow
Housing material	-
Protection features	Bump resistant
International Protection (IP) code	IP65
Sustainability certificates	RoHS
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Battery type	Built-in battery
Input voltage	10 V
Battery voltage	5 V
Battery capacity	800 mAh
Power consumption	500 mA
Power source type	Battery
Number of batteries supported	1

Weight and Dimensions

Depth	74 mm
Width	110 mm
Height	212 mm
Weight	380 g
Base dimensions	108 x 95 x 240 mm