Water Tech Pool Blaster Pulse - Maintenance and Storage; Cleaning and Storage Guidelines

3
. Detach the Filter Sleeve from the cleaner. Clean out the debris from the sleeve.
4
. Pull up the small loop on Filter Sock elastic to lift up the band and then pry along the band t
o
release the sock from the tabs on the Filter Cone base. Fig. 8
5
. Rinse the Filter Sock with clean water only. DO NOT wash it in a washing machine or wit
h
detergent.
6
. Reverse the steps to place back the Filter Sock to the Filter Cone. Make sure the elastic ban
d
is not twisted.
N
ote: To assemble the Filter Sleeve back to the body, push the sleeve towards the Filter Con
e
B
ase until it stops. Turn the sleeve until its indentation on the edge is secured by the Filter Sleev
e
L
ocking Ta
b.
C
AUTION!
R
eplace the damaged Filter Sock immediately before next operation.
M
AINTENANCE & STORAGE
1. Unplug the external adaptor from socket and then unplug the adapter jack from Chargin
g
Base.
2. If necessary, rinse the cleaner with fresh water. DO NOT use detergent.
3. Use dry damp cloth to clean and dry the cleaner and all accessories.
4. Store cleaner and accessories indoors in a well-ventilated area away from the sunlight
,
children, heat, ignition sources and pool chemicals.
5. Ambient temperature for storage should be 10˚C – 40˚C (50˚F – 104˚F).