Need help?Do you have a question about the Waters Quattro Premier XE and is the answer not in the manual?
General| Type | Tandem Quadrupole Mass Spectrometer |
|---|---|
| Ionization Source | Electrospray Ionization (ESI), Atmospheric Pressure Chemical Ionization (APCI) |
| Software | MassLynx |
| Polarity | Positive and Negative |
| Polarity Switching speed | 20 ms |
| Data Acquisition Rate | Up to 10, 000 amu/sec |
| Scan Modes | Full Scan, Precursor Ion Scan, Neutral Loss Scan, MRM |
| Scan Speed | Up to 10, 000 amu/sec |
| Mass Accuracy | 0.1 Da |
| Weight | 150 kg |
| Resolution | Unit mass resolution (0.7 ± 0.1 Da at half height) |
Discusses solvent leakage hazards and O-ring maintenance for the source exhaust system.
Explains common symbols used in the documentation and on the instrument.
Describes the purpose and applications of the Quattro Premier XE Combined APPI and APCI Source.
Provides guidance on calibrating LC systems and mass spectrometers.
Details the operation and configuration of the APPI ionization mode.
Details the operation and configuration of the APCI ionization mode.
Explains the dual APPI/APCI mode for rapid switching between ionization methods.
Describes the components of the combined APPI/APCI source.
Provides instructions for installing the combined APPI/APCI source.
Provides instructions for removing the combined APPI/APCI source.
Detailed instructions for preparing and operating the instrument in APPI mode.
Detailed instructions for preparing and operating the instrument in APCI mode.
Detailed instructions for preparing and operating the instrument in dual APPI/APCI mode.
Refers to the main instrument operator's guide for general maintenance details.
Outlines periodic maintenance tasks and their recommended frequencies for optimal performance.
Provides essential safety precautions and handling guidelines for maintenance procedures.
Details the procedure for safely removing O-rings and seals using the provided kit.
Step-by-step guide for replacing the UV lamp bulb in the APPI lamp drive assembly.
Instructions for cleaning the magnesium fluoride lamp window to maintain APPI performance.
Comprehensive guide for replacing all O-rings within the APPI lamp drive assembly.
Explains various warning symbols and their meanings to alert users to potential hazards.
Describes the caution symbol and its implications for instrument or sample integrity.
Lists general warnings applicable across all Waters instruments, covering various risks and precautions.
Details electrical symbols and handling symbols used on instruments and packaging.
Provides guidance on preventing contamination within the instrument system.
Lists instrument components and their materials that may be exposed to solvents.
Lists common ingredients used for preparing mobile phases in reverse-phase LC/MS.
To Next Page