Watlow 965 Series - Output 2 Wiring

Install and Wire, Chapter 2
11
WATLOW Series 965 User's Manual
Output 2 Wiring
Solid-state Relay Without Contact Suppression, 0.5 Amp
Model # 965A - 3
K - 00 .
Switched DC Output
Model # 965A - 3
C - 00 .
Mechanical Relay Without Contact Suppression,
Form C, 5 Amp
Model # 965A - 3 D - 00 .
Figure 16 -
Switched dc Output
Wiring
External
Load
7
6
-
+
External
Load
7
6
NO
COM
1NC
Fuse
L1
L2
Customer Supplied
Quencharc
Figure 17 -
5 Amp Mechanical
Relay Wiring
Figure 18 -
0.5 Amp Solid-state
Relay Without
Contact Suppres-
sion Wiring
External
Load
7
SS2
SS2
1
Fuse
L1
L2
Custommer Supplied
Quencharc
Customer Supplied
Quencharc
NOTE:
Output is in open
State in Alarm
Condition.
NOTE:
Switching inductive
loads (relay coils,
solenoids, etc.) with
the mechanical
relay, switched dc or
solid-state relay
output options
requires using an
RC suppressor.
Watlow carries the
RC suppressor
Quencharc brand
name, which is a
trademark of ITW
Pakron. Watlow Part
No. 0804-0147-0000.
7
unregulated
V+
V—
6
Internal Circuitry
NOTE:
For more informa-
tion on alarms see
page 24.