Watlow F4P Series User Manual

0600-0032-0013 Rev D
January 2003 $15.00
User’s Manual
Registered Company
Winona, Minnesota USA
Series F4P
96mm x 96mm Process Controller (1/4 DIN)
with Guided Setup and Programming
1241 Bundy Boulevard, Winona, Minnesota USA
Phone: +1 (507) 454-5300, Fax: +1 (507) 452-4507 http://www.watlow.com
English

Watlow F4P Series Specifications

General

Model	F4P Series
Control Modes	PID, On/Off
Input Types	Thermocouple, RTD
Output Types	Relay
Communication Protocols	Modbus
Power Supply	24 VAC/VDC
Agency Approvals	CE, UL
Enclosure Rating	NEMA 4X

Summary

Series F4P User's Manual

96mm x 96mm Process Controller (1/4 DIN) with Guided Setup and Programming

Safety Information

Technical Assistance

Chapter One: Introduction

Setup Steps

Outlines the steps for setting up the controller.

Chapter Two: Navigation and Operating from the Front Panel

Keys, Displays and Lights

Details the controller's keys, display, and indicator lights.

Chapter Three: Operations Page

Alarm Set Points

Explains how to set alarm thresholds and types.

Autotune PID

Chapter Four: Setup Page

Parameter Setup Order

Provides the recommended order for initial controller configuration.

Chapter Five: Factory Page

Security

Chapter Six: Parameters

Chapter Seven: Features

Inputs

Control Methods

Alarms

Covers alarm set points, hysteresis, types, and logic.

Chapter Eight: Installation & Wiring

Installing the Series F4P Controller

Guides the physical installation of the controller into a panel.

Wiring the Series F4P

Explains wiring options and isolation barriers.

Chapter Nine: Communications

Series F4P Modbus Registers