Watlow F4P Series

6.10 ■ Parameters Watlow Series F4P
Operations Page Parameter Record
Make a photocopy of this page and enter your settings on that copy.
Name _________________________________________________
Date __________________________________________________
PID Set Channel 1
(Optional Inner Loop)
Proportional Band A
IntegralA / ResetA
DerivativeA / RateA
Dead Band A
Hysteresis A
Proportional Band B
IntegralB / ResetB
DerivativeB / RateB
Dead Band B
Hysteresis B
Cascade PID Set
(Outer Loop)
Proportional Band A
IntegralA / ResetA
DerivativeA / RateA
Dead Band A
Hysteresis A
Proportional Band B
IntegralB / ResetB
DerivativeB / RateB
Dead Band B
Hysteresis B
Alarm Set Point Menu Alarm 1 Alarm 2
Low Set Point
High Set Point
Low Deviation
High Deviation
Rate
PID Crossover
PID Cross
Ramp x to Set Point
Ramp to Set Point Mode
Ramp to Set Point Rate
Ramp to Set Point Scale
Control Set Points
Boost Power
Boost Delay Time
Remote/Local Set Point
Boost Set Point
Dig. SP 1 Dig. SP 2 Dig. SP 3 Dig. SP 4
Digital Set Point x (1 to 4)
Digital Differential Set Point x
(1 to 4)
Digital Ratio Set Point x
(1 to 4)
PID 1 to 2 PID 2 to 3 PID 3 to 4 PID 4 to 5
PID Set 1 PID Set 2 PID Set 3 PID Set 4 PID Set 5
PID Set 1 PID Set 2 PID Set 3 PID Set 4 PID Set 5
Autotune PID
Autotune PID
Autotune PID Type
Autotune PID Cascade
Cascade Inner Loop
Cascade Outer Loop