Watlow F4P Series

6.2 ■ Parameters Watlow Series F4P
✔ Note: For more information about how parameter settings affect
the controller’s operation, see the Features Chapter.
Modbus
Register
Range read/write Conditions for
Parameter Description (Modbus Value) Default (I/O, Set) Parameters to Appear
[Defaults de-
pend on the
control type
selected
and set-
tings in
Setup>Cus-
tom Main
Page.]
None
Input 1 [value]
Input 1 Value bar
[graph]
Input 2 [value]
Input 2 Value bar
[graph]
Input 3 [value]
Input 3 Value bar
[graph]
Dgt. [digital] Diff. [dif-
ferential] Value
CTL SP [Differential
Set Point]
Set Differential
Dgt. [digital] Ratio
Value
CTL SP [Ratio Set
Point]
Set Ratio
Digital Set Point
Remote Set Point 2
Remote Set Point 3
Target Set Point
[cascade] Inner Set
Point
Set Point 1
Set Point 1 bar [graph]
% Power 1A
% Power 1B
% Power 1A bar [graph]
% Power 1B bar [graph]
Tune Status 1
Digital Inputs
Parameter x (1 to 16)
View customized parame-
ter list.
Alarm x (1 to 2) Condition
Input x (1 to 3) Error
Main Page
Main Page
Main Page Parameters