Watlow F4P Series

Watlow Series F4P Parameters ■ 6.23
Setup Page Parameter Record
Make a photocopy of this page and enter your settings on that copy.
Name ___________________________________________ Date ______________________________
PID Units
°F or °C
Show °F or °C
Maximum Transfer Heat
Maximum Transfer Cool
Manual to Auto Transfer
Autotune Set Point
Failure Mode
Input 1 Fail
Open Loop Detect
Analog
Input In 1 In 2 In 3
Sensor
Type
Control Type
Units Name
Decimal
Scale Low
Scale High
Scaling
Set Point Low Limit
Set Point High Limit
Offset Type
Input Offsets In Off 1 In Off 2 In Off 3 In Off 4 In Off 5 In Off 6 In Off 7 In Off 8 In Off 9 In Off 10
Clear Input Offsets
Offset Point
Calibration Offset Value
Filter Time
Error Latch
Square Root
Auto/Manual Slidewire Cali.
Slidewire Deadband
Slidewire Hysteresis
Control Type
Cascade
Cascade Low Range
Cascade High Range
Cascade Low Deviation
Cascade High Deviation
Digital Input Digital In 1 Digital In 2 Digital In 3 Digital In 4
Function
Name
Activate Message
Message Display Time
Condition
System Setting