EasyManua.ls Logo

Watlow Ez-Zone PM4 - Page 59

Default Icon
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Watlow EZ-ZONE
®
PM PID Controller 56 Chapter 6 Setup Page
Setup Page
Dis-
play
Parameter name
Description
Range Default
Parameter
Appears
in Menu
When
Modbus Rela-
tive
Address
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Data
Type
&
Read/
Write
[`r;Lo]
[ r.Lo]
Output (1 process)
Range Low
Set the minimum
value of the retrans-
mit value range in
process units. When
the retransmit source
is at this value, the
retransmit output will
be at its Scale Low
value.
-1,999.000to9,999.000°F
or units
-1,128.000to5,537.000°C
0.0°For
units
-18°C
Always if
digit 6 of
the part
number is
an "F".
Instance 1
Map 1 Map 2
740 860
0x76 (118)
1
0xB (11)
101 float
RWES
[`r;hi]
[ r.hi]
Output (1 process)
Range High
Set the maximum
value of the retrans-
mit value range in
process units. When
the retransmit source
is at this value, the
retransmit output will
be at its Scale High
value.
-1,999.000to9,999.000°F
or units
-1,128.000to5,537.000°C
9,999.0°F
or units
5,537.0°C
Always if
digit 6 of
the part
number is
an "F".
Instance 1
Map 1 Map 2
742 862
0x76 (118)
1
0xC (12)
102 float
RWES
[`o;CA]
[ o.CA]
Output (1 process)
Calibration Offset
Set an offset value for
a process output.
-1,999.000to9,999.000°F
or units
-1,110.555to5,555.000°C
0.0°For
units
0.0°C
Always if
digit 6 of
the part
number is
an "F".
Instance 1
Map 1 Map 2
732 852
0x76 (118)
1
7
105 float
RWES
[Alm]
[`Set]
Alarm Menu
[`A;ty]
[ A.ty]
Alarm (1 to 4)
Type
Select whether the
alarm trigger is a
fixed value or will
track the set point.
[`oFF] Off (62)
[PR;AL] Process Alarm (76)
[dE;AL] Deviation Alarm
(24)
Off Always Instance 1
Map 1 Map 2
1508 1908
Offset to next
instance (Map
1 & Map 2)
equals +60
0x6D (109)
1 to 4
0xF (15)
20 uint
RWES
[`Sr;A]
[ Sr.A]
Alarm (1 to 4)
Source Function A
Select what will trig-
ger this alarm.
[``Ai] Analog Input (142)
[PWr] Power, Control
Loop (73)
[``Pu] Process Value
(241)
[`Lnr] Linearization (238)
[CUrr] Current (22)
Type is not
set to Off
or devia-
tion..
Instance 1
Map 1 Map 2
1512 1912
Offset to next
instance (Map
1 & Map 2)
equals +60
0x6D (109)
1 to 4
0x11 (17)
21 uint
RWES
[`is;A]
[ iS.A]
Alarm (1 to 2)
Source Instance A
Set the instance of
the function selected
above.
1 or 2 1 Type is not
set to Off.
Instance 1
Map 1 Map 2
1514 1914
Instance 2
Map 1 Map 2
1564 1974
0x6D (109)
1 to 2
0x12 (18)
22 uint
RWES
Note:
Some values will be rounded off to fit in the four-character display. Full values can be read with
other interfaces.
* Available with PM4, PM8 and PM9 models only
R: Read
W: Write
E:
EE-
PROM
S:
User
Set

Table of Contents

Other manuals for Watlow Ez-Zone PM4

Related product manuals