Watson Marlow Pumps 620R User Manual

630 Pn/PnN Installation, operating, and maintenance manual
m-630pn-en-09 02-02-22 1
Contents
1 Certification 3
1.1 Declaration of conformity 4
1.2 Declaration of incorporation 5
2 When you unpack your pump 6
2.1 Unpacking your pump 6
2.2 Packaging disposal 6
2.3 Inspection 6
2.4 Components supplied 6
2.5 Storage 6
3 Information for returning pumps 7
4 Peristaltic pumps - an overview 7
5 Warranty 8
6 Safety notes 9
7 Pump specifications 12
7.1 Weights 13
7.2 Pumphead options 13
8 Good pump installation practice 14
8.1 General recommendations 14
8.2 Dos and don'ts 15
9 Pump operation 16
9.1 Keypad layout and key IDs 16
9.2 Starting and stopping 17
9.3 Using up and down keys 17
9.4 Maximum speed 17
9.5 Change rotation direction 17
10 Connecting to a power supply 18
10.1 Conductor colour coding 19
10.2 Wiring the NEMA module - PROFINET® pumps 19
11 Start-up check list 21
12 PROFINET® control wiring 21
12.1 Features on the rear of the pump 22
12.2 RJ45 connections 23
12.3 Control wiring 23

Watson Marlow Pumps 620R Specifications

General

Pump Type	Peristaltic
Operating Temperature	5 to 40 °C
Power Supply	100-240V AC, 50/60 Hz
IP Rating	IP31
Max Pressure	2 bar
Control	Manual, Remote (Analog, Digital)
Pumphead	620R
Tube/Hose Material	silicone
Motor Type	AC motor

Summary

Certification

Declaration of conformity

Details compliance with EU directives and harmonised standards.

Declaration of incorporation

Declares conformity to Machinery Directive for integration into other machinery.

When you unpack your pump

Unpacking your pump

Instructions for carefully unpacking and checking components against the supplied list.

Components supplied

Lists the items included with the 630 pump drive unit and N module.

Information for returning pumps

Peristaltic pumps - an overview

Warranty

Safety notes

Pump specifications

Pumphead options

Shows visual examples of available pumphead options for the 630 pump range.

Good pump installation practice

General recommendations

Advises on pump siting, airflow, ambient temperature, and emergency stop devices.

Dos and don'ts

Lists important practices to follow and avoid during pump installation and tubing setup.

Pump operation

Keypad layout and key IDs

Identifies and explains the function of each key on the pump's control keypad.

Starting and stopping

Describes the procedure for starting and stopping the pump using the keypad.

Connecting to a power supply

Start-up check list

PROFINET® control wiring

Features on the rear of the pump

Identifies and labels the connectors and switches located on the rear panel of the pump.

RJ45 connections

Explains the use of RJ45 ports for network connection and provides an indicator table.