watt box WB-800CH1U-IPVM-8 User Manual (English)

Questions and Answers:

M
Molly PaceAug 5, 2025
What to do if my WattBox AC Power Distribution is not turning on?
- E
  Elizabeth FullerAug 5, 2025
  If your WattBox AC Power Distribution is not turning on and no LEDs are illuminated, there could be several reasons. First, ensure the WattBox is turned on by pressing the power button. If that doesn't work, verify that the AC power plug is correctly plugged into a grounded 120V wall outlet and that the outlet is active (check wall switches and circuit breakers). Finally, if too many devices are connected, the internal circuit breaker might have tripped. If this is the case, press the circuit breaker reset button, wait 10 minutes, and try again. If it continues to trip, move some devices to another WattBox.
J
Jesus WeaverAug 16, 2025
Why is my device not receiving power from my WattBox AC Power Distribution?
- J
  Jorge BurtonAug 16, 2025
  If a component connected to your WattBox AC Power Distribution isn't receiving power, there are a few potential causes. If the component is plugged into a controlled outlet, use the WattBox interface to ensure the outlet is turned on. In some cases, you may need to manually turn on the component, even after the WattBox is powered on. As a last resort, try factory defaulting the WattBox.
P
phillipsjamesAug 25, 2025
How to stop humming or buzzing noise from speakers connected to WattBox AC Power Distribution?
- T
  tiffany32Aug 26, 2025
  If your speakers are emitting a humming or buzzing noise when connected to the WattBox AC Power Distribution, it might be due to a grounding issue. The WattBox may be sharing AC power with equipment that is not properly grounded. To resolve this, connect the WattBox to a dedicated outlet. You can also try unplugging components from the WattBox one at a time to see if the noise stops.