1. The Controller’s red DEMAND LED status indicator will light.
2. The unit checks all five pre-purge safety switches listed at the beginning of this section.
The Edge Controller’s ignition sequence screen walks you through the ignition screens and
demonstrates (or highlights) which switches are not met. SSOV locations are shown in
Figure 3-1a through 3-1d.
Figure 3-1a: BMK750 & 1000 SSOV Location (P/N 22322 shown)
Figure 3-1b: BMK1500 & 2000 SSOV Location (P/N 22314 shown)
To Next Page
Loading...
