Watts Aerco Modulex MLX EXT 1530 - Page 40

Modulex EXT Commercial Series Boilers User Manual
CHAPTER 4: Installation Instructions
Page 40 of 144 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 OMM-0095_0H
09/15/2017 Phone: 800-526-0288 GF-139
Figure 4-11: Connection of Exhaust Manifold To Boiler Flue Exhaust Outlet
For venting systems in the USA, it is necessary to assemble the Euro-to-USA adaptor to the flue
manifold as shown in Figure 4-12.
Figure 4-12: Assembly of USA-to-European Flue Adaptor to Flue Manifold
NOTE:
The gasket may seem large. It is intentionally designed to produce a tight fit.
EUROPEAN-TO-USA
FLUE ADAPTER
FLUE MANIFOLD
GASKET FOR ATTACHING
EUROPEAN-TO-USA
FLUE ADAPTER
FLUE MANIFOLD
NUTS (10)
WASHERS (10)
GASKET FOR ATTACHING
EUROPEAN-TO-USA FLUE
ADAPTER
RECTANGULAR GASKET