Modulex EXT Commercial Series Boilers User Manual
CHAPTER 6: Operation of the E8 Controller
OMM-0095_0H AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 Page 89 of 144
GF-139 Phone: 800-526-0288 09/15/2017
6.2 QUICK START INSTRUCTIONS
Below are instructions for setting the most basic settings in the E8 controller, including
maximum and minimum flow temperature, room temperature settings, heat slope, and initiation
of heating programs.
IMPORTANT!
Before the boiler may be used, the E8 controller
MUST
be first initialized by entering
language, year, month, day, and hour in the Installation Menu, as described in section 6.1,
above.
6.2.1 Setting Maximum and Minimum Flow Temperature
Figure 6-2: E8 Quick Start, Max. & Min. Flow Temperature Settings
To Next Page
Loading...
