Watts Vision BT-CT02 - Heating and Cooling Installation Types; Type 1 Installation; Type 2 Installation

ENGLISH
EN
13
PPLIMW15428C | 2019 / 06 Watts
5. INSTALLATION TYPES (HEATING / COOLING)
TYPE 1 In this configuration:
• Pair first the thermostat (master) with the Central before pairing the other devices
(configured as heating devices).
• The actuators regulate on thermostat temperature.
TYPE 2 In this configuration:
• Pair first the thermostat (master - configured as a heating device) with the Central
before pairing the other devices.
• The other devices regulate on thermostat temperature.
Warning! In this installation type, the thermostat (MASTER) must be in regulation Air
mode (not floor or Air + Floor)
ROOM 1
ROOM 1
Master-Thermostat
Master
and/or
and/or
and/or
and/or and/or
Actuators