Watts Vision BT-CT02 - Maintenance and Technical Specifications; Central Unit Cleaning Guide; Technical Characteristics

ENGLISH
EN
21
PPLIMW15428C | 2019 / 06 Watts
9. TECHNICAL CHARACTERISTICS
It is an electronic control device
Operating temperature, connected.
Operating temperature, battery
Shipping and storage temperature
-30°C to +40*C
0°C to +40°C
-30°C to +50°C
Electrical Protection
Electrical insulation
IP30
Class II
Temperature precision 0.1°C (from thermostat)
Setting Temperature Range
• Comfort
• Reduced
• Anti-freeze
5°C to 30°C in 0.5°C steps
5°C to 30°C in 0.5°C steps
5°C to 10°C
Power Supply 85-265V, 50-60 Hz
Radio Frequency 868 MHz, <10mW, Range <40m internal, <100m open space
Software version
User interface: Shown on the main menu V.xx.xx
Wifi communication: Shown on the wifi menu xx.xx
SD card <=16GB (FAT )
WIFI
802.11b – 2.4GHz
802.11g – 2.4GHz
Dimensions Width: 158 mm, Height: 116,50 mm, Depth: 20,5 mm
Weight (Central unit + power supply + table support) 0.635kg
• Wring out any excess water from the
cloth.
• Gently wipe the display and sides of the
central, making sure no drops of water
accumulate around the product.
Important: Do not spray central directly
with water, or use cleaning solutions or pol-
ishes, as doing so may damage the central.
8. MAINTENANCE
Cleaning of the central unit
Gently dust the outside of the central with
a soft, lint-free cloth. If the central needs a
more thorough cleaning:
• Lightly dampen a soft and clean cloth
with water.
• FAQ, trouble shooting and software
updates of the central unit
Please visit our website wattswater.eu in
section “WATTS Vision
®
Smart Home
System”