Page 10
Connect the open end of the white 3/8” tube into the 3/8” quick connect tting on the tank ball
valve making sure the tube is pushed in all the way to the tube stop.
Step 22
White Tube Connection - RO Module to Storage Tank
Step 21
Locate the 1/4” white tube from the RO module labeled “Tank” and
plug into the valve at the water storage tank
Reverse Osmosis Module Mounting
Step 23 Determine best location for the RO module to be mounted to allow
for future system maintenance. The parts bag has 2 self tapping
screws. Using an electric drill with a Phillips bit, screw them into the
cabinet wall 10-5/8” apart and 16” from the bottom of the cabinet.
Step 24
Identify each cartridge and the proper location on the system by
matching the colors and description.
Install the Cartridges
Step 25
Insert each cartridge with a 1/4 turn in the clock wise direction.
The cartridge is installed properly when the label is facing toward
the front of the unit.
Note: The cartridge head swivel up and down for easy access.
To Next Page
Loading...
