Need help?Do you have a question about the WaveSense jazz and is the answer not in the manual?
General| Sample Size | 0.5 µL |
|---|---|
| Test Time | 5 seconds |
| Coding | No Coding Required |
| Operating Temperature | 50-104°F (10-40°C) |
| Operating Humidity | 10-90% RH |
| Hematocrit Range | 30-55% |
| Measurement Range | 20-600 mg/dL |
| Storage Conditions | 36-86°F (2-30°C) |
Details about the WaveSense Jazz test strip, its requirements, and handling.
Guidelines for storing and using WaveSense Jazz test strips correctly.
Covers the initial system check and how to activate the meter.
Instructions for viewing results, averages, and deactivating the meter.
Details on entering menus, accelerating through options, and deactivation.
Steps and reasons for performing control solution tests.
Detailed instructions on applying the blood sample to the test strip.
How to tag results with meal times and interpret feedback symbols.
Procedures for removing the test strip and lancet after testing.
Explanation of averages, standard deviations, and their significance.
How to access and view individual past test results.
Accessing and understanding 14-day statistics like averages and deviations.
How to view average glucose readings for 14, 30, and 90-day periods.
Tracking glucose levels before and after meals and glucose variability.
How to view 1-month, 2-week, and 3-day glucose trend graphs.
Configuring audible alerts and the meter's time settings.
Instructions for setting the correct date and date format.
Customizing target glucose ranges for positive feedback.
Details on error codes 1-4 and their related test strip issues.
Covers error codes 5-7, temp/battery icons, and troubleshooting situations.
Understanding various messages and icons on the meter display.
Step-by-step guide for replacing the meter's batteries.
Procedure for resetting time and date after battery replacement.
Explanation of common symbols found on equipment and in documents.
Details on the WaveSense lifetime limited warranty.
To Next Page