Waveshare UART TO ETH User Manual

RS485 TO ETH ( B)
The virtual serial port has been connected
Open SSCOM to simulate the user's serial port program, open COM2 (the virtual serial port
above), open another SSCOM to simulate a serial device, and open COM3 (hardware serial port).
At this time, the COM2 sending data link is as follows: COM2 — "Vircom — "Serial server network
20 / 52 www.waveshare.com

Waveshare UART TO ETH Specifications

General

Brand	Waveshare
Model	UART TO ETH
Category	Control Unit
Language	English