Wavetek 132 - Section 2 Operation - Power Conversion; Converting to 230-Volt Line Power

Converting
to
230-Volt Line Power
Instruments are
shipped
from the factory
with the
power
transformer connected
for 115-volt line
power,
unless ordered for 230-volt use.
Converting
a
115-volt
unit
for
230-volt
operation is
a
simple
matter.
1.
Remove
power cord.
2.
Loosen two captive thumb screws on rear panel
and remove
panel.
3. The conversion switch is located on
the chassis.
Use a thin-bladed
screwdriver to move the
115-
230
switch
to the
230
position.
4. Replace 1/4-ampere fuse with
a
1/8-ampere
fuse
of
the same type.
10