19
You can edit the value of the highlighted limit by pressing the
key. When the edit box becomes active, enter the desired value. Be
sure to press the key when finished to terminate your entry.
Press the soft key to return all limits in the test point to their
factory preset values.
Channel Plan Configuration
VIDEO SIGNAL TYPE
Your microStealth is capable of measuring signal levels on NTSC or
PAL video signals. You should make sure that the correct video
type is selected.
CHANNEL SEQUENCE
You can specify whether channels are listed in numeric or frequency
order. This setting also affects the sequence in which channels are
tuned in the LEVEL screen when using the left and right arrows.
Note
The SCAN screen always displays channels in order of frequency
regardless of the CHANNEL SEQUENCE setting.
BUILD CHANNEL PLAN
Your microStealth is capable of identifying which channels are on
your cable plant. This allows you to quickly and easily generate a
customized channel plan. Press the key and let microStealth
learn your system.
Important
Ensure that your microStealth is connected to the cable system
before initiating this procedure.
To Next Page
Loading...