Pico
™
on-the-go car seat INSTRUCTION MANUAL
1716
Release fold retention loop by pulling
up on webbing pull tab.
Rotate seat bottom from stored to use position.
SETTING UP PICOUNSAFE VEHICLE SEAT BELT SYSTEMS
Some inatable seat belts are labeled as inatable belts. Most inatable belts are
noticeably thicker than a normal seat belt. Check your vehicle owner’s manual to see if
your vehicle has inatable belts. NEVER use this car seat with an inatable vehicle belt.
NEVER USE ANY OF THE FOLLOWING VEHICLE BELT TYPES TO INSTALL THIS CAR SEAT:
Lap Belt with Motorized Shoulder Belt.
DO NOT use with any car seat.
See your vehicle dealer for options for securing
a child restraint in this location.
DO NOT use with any car seat.
Belts will not stay tight while driving.
See your vehicle dealer for options for
securing a child restraint in this location.
INFLATABLE SEAT BELTS
MOTORIZED PASSIVE RESTRAINTS
DOOR MOUNTED LAP OR SHOULDER BELT
WARNING
• Prevent pinching of child’s ngers. Make sure seat bottom
is locked in use position before placing child in seat.
• Headrest MUST be locked in a use position with
headrest bottom above top of seat back before use.
Check out support videos at
www.wayb.com/pages/support.
Point your smartphone’s camera
directly at the QR Code to activate.