EasyManua.ls Logo

Wayb Pico - SETTING UP PICO; Locking Seat Bottom; Adjusting Headrest; TWO WAYS TO SECURE PICO

Wayb Pico
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Pico
on-the-go car seat INSTRUCTION MANUAL
LATCH SYSTEM
LATCH stands for Lower Anchors and Tethers for Children.
Most model year 2002 and newer vehicles are equipped with L ATCH Anchorage
Systems. Check vehicle owner’s manual to determine if your vehicle has the LATCH
Anchorage System. Look for one of the below symbols:
Some vehicle owner’s manuals may identify the LATCH System as “ISOFIX.
An ISOFIX System can be used in the same way as the LATCH System.
1918
Adjust headrest into correct use position.
NOTE: See second step in the “Securing Child in Pico”
section for assistance on headrest adjustment (pg. 35).
Lock seat bottom in use position by closing fold release.
SETTING UP PICO TWO WAYS TO SECURE PICO
This car seat can be secured to a vehicle using the LATCH System or a vehicle
seat belt. WAYB recommends installing with the L ATCH System whenever
possible as the LATCH system generally allows for easiest installation.
LATCH system
symbol
LATCH Lower Anchor
symbol
Tether Anchor
symbol
-or- -or-
Tether MUST always be used when available and
installed with lower anchors of the LATCH system.

Related product manuals