Wayne-Dalton 9605 User Manual

This Installation document is available at no charge from:
- Your local Wayne Dalton Sales Center, or
- Online at www.Wayne-Dalton.com, or
- By mailing to: Wayne Dalton, a division of Overhead Door Corporation, P.O. Box
67, Mt. Hope, OH., 44660
©Copyright 2017
REV1_07/21/2017Part Number
Table Of Contents
361187
PLEASE DO NOT RETURN THIS PRODUCT
TO THE STORE
If you need assistance, please call 1-866-
569-3799 (press Option 1) and follow the
prompts to contact a customer service
representative. They will be happy to handle
any questions that you may have.
Pre-Installation 2
Important Safety Instructions 2
Removing an Existing Door and Preparing the Opening 2
Package Contents 3
Door Section Identification 4
Tools Required 4
Breakdown Of Parts 5
Installation 6
Counterbalance Installation Instructions 9
Optional Installation 13
Door Arm Hookup 13
Trolley Arm Configuration 13
Inside Lock 13
Pull Down Rope 13
Step Plate 13
Maintenance 15
Cleaning Your Garage Door 15
Painting Your Garage Door 15
Maintaining The Finish On Your Garage Door 15
Operation And Maintenance 15
Warranty 17
Wayne Dalton, a division of Overhead Door Corporation
Models 9100 / 9405
/ 9605
E x t E n s i o n s p r i n g
installation instructions and ownEr’s
Manual
rEsidEntial
low HEadrooM
To avoid possible injury, read and fully understand the enclosed
instructions carefully before installing and operating the garage door. Pay
close attention to all warnings and notes. After installation is complete,
fasten this manual near garage door for easy reference.
IMPORTANT NOTICES!

Wayne-Dalton 9605 Specifications

General

Brand	Wayne-Dalton
Model	9605
Category	Garage Door Opener
Language	English

Summary

Pre-Installation

Important Safety Instructions

Crucial safety guidelines and warnings to prevent injury and ensure proper door operation.

Removing an Existing Door and Preparing the Opening

Instructions for safely removing an old garage door and preparing the opening for a new installation.

Package Contents

Lists and illustrates all the parts included in the garage door package for installation.

Headroom Requirements

Details the necessary vertical space above the door for proper track and spring installation.

Backroom Requirements

Specifies the required space behind the garage door opening for full operation.

Door Section Identification

Tools Required

Breakdown Of Parts

INSTALLATION

Attaching Flag Angles and Jamb Brackets To Vertical Tracks

Step-by-step guide for attaching flag angles and jamb brackets to the vertical tracks.

Cable Drum Assemblies and Track Rollers

Instructions for installing cable drum assemblies and track rollers onto the door.

Attaching Drawbar Operator Bracket

Stacking Sections

Stacking Top Section

Attaching Horizontal Tracks

Adjusting Top Fixtures

Attaching Cable Lift Sheaves

Attaching Rear Back Hangs

Attaching Extension Springs

Attaching Spring Sheaves

Counterbalance Lift Cable Adjustments

Balancing Door

Attaching Weather Seal

Optional Installation

Door Arm Hookup

Connects the door arm to the drawbar operator bracket using a clevis pin and hairpin cotter.

Trolley Arm Configuration

Details how to configure the trolley arm for proper door operator alignment.

Inside Lock

Instructions for installing the inside lock on the second door section.

Pull Down Rope

Guidance on installing the pull down rope for manual door operation.

Maintenance

Cleaning Your Garage Door

Recommended procedure for cleaning the garage door's finish and polycarbonate windows.

Painting Your Garage Door

Reference to instructions for painting the garage door sections.

Maintaining The Finish On Your Garage Door

Guidance on applying a field-applied top clear coat for the door's finish.

Operation And Maintenance

General guidelines for operating the door and performing routine monthly maintenance.

Warranty