19
Table 1: Pipe Sizing Chart for Natural Gas (0-0.5 psi) with Straight Schedule 40 Metal Pipe
The following chart is based on 0-0.5 psi inlet pressure, specific gravity of 0.6, and a pressure loss of 0.5”
w.c..
Maximum Capacity of Pipe Size in Btu/hr
Table 2: Pipe Sizing Chart for LP (11” w.c.) with Straight Schedule 40 Metal Pipe
The following chart is based on 11” w.c. inlet pressure and a pressure drop of 0.5” w.c..
Special use: Piping sizing between single or second stage (low pressure regulator) and appliance.
Maximum Capacity of Pipe Size in Btu/hr
Maximum Capacity in Btu/hr