EasyManua.ls Logo

Wayne TSC130 User Manual

Wayne TSC130
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SPECIFICATIONS
POWER SUPPLY REQUIREMENTS 120 V, 60 Hz
MOTOR Single Phase
HORSEPOWER 1/4
CIRCUIT REQUIREMENT 15 A (minimum)
LIQUID TEMERATURE RANGE 40° F- 120° F
620006-001 B 08/18© 2018, WAYNE/Scott Fetzer Company
CONSTRUCTION
MOTOR HOUSING Thermoplastic
MOTOR SHAFT Stainless Steel
IMPELLER Thermoplastic
VOLUTE Thermoplastic
PUMP DISCHARGE 3/4 in. Brass Hose Fitting
DEWATERING PUMP TSC
www.waynepumps.com
Operating Instructions and Parts Manual TSC130
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property
damage! Retain instructions for future reference.
PERFORMANCE
Model HP Discharge Head
0 ft 5 ft 10 ft 15 ft 20 ft
TSC130 1/4 Gal / hr 1250 1140 1000 830 640
Question and Answer IconNeed help?

Do you have a question about the Wayne TSC130 and is the answer not in the manual?

Wayne TSC130 Specifications

General IconGeneral
BrandWayne
ModelTSC130
CategoryWater Pump
LanguageEnglish

Summary

Safety Information

Work Area Safety

Do not operate in explosive atmospheres and keep bystanders away to avoid distractions.

Electrical and Personal Safety

Electrical Safety: GFCI Outlet Requirement

Pump must be plugged into a properly installed, grounded GFCI outlet. Never modify the plug.

Electrical Safety: Qualified Electrician

Electrical wiring must be performed by a qualified electrician to avoid fatal electrical shock.

Service and Pump Safety

Service: Electrical Hazard Warning

Always disconnect power before servicing. Failure to do so could result in fatal electrical shock.

Specific Safety: Electric Shock and GFCI

Pump is supplied with a grounding-type plug. Connect only to a properly grounded, GFCI receptacle.

Multi-Use Pump: Fluid Pumping Restrictions

Do not pump flammable or explosive fluids. Use only for clear water to avoid injury or death.

Multi-Use Pump: Power Disconnection

Always disconnect power before installing, servicing, relocating, or maintaining the pump.

Pump Installation: Fluid Type

Pump should only be used to pump clear water. Do not use for flammable or explosive fluids.

Pump Installation and Operation

Pump Installation: Grounding Prong Safety

Never cut off the grounding prong or use an adapter. Ensure proper grounding for safety.

Maintenance and Troubleshooting

Related product manuals