wayscral E-Start - Pre-Operation Check List

265
PRE-OPERATION CHECKS
PRE-OPERATION CHECK LIST
YFIREV OTTNIOPKCEHC
.level yrettab kcehC•yrettaB
• Charging if necessary.
Front brake • Check operation.
• If soft or spongy, have dealer bleed hydraulic system.
• Check brake pads for wear.
• Replace if necessary.
•
•
• Check hydraulic system for leakage.
Rear brake • Check operation.
• Lubricate cable if necessary.
• Check lever free play.
•
.htooms si noitarepo taht erus ekaM•pirg elttorhT
• If necessary, have checked by a dealer.
.egamad rof kcehC•serit dna sleehW
• Check tire condition and tread depth.
• Check air pressure.
.htooms si noitarepo taht erus ekaM•srevel ekarB
• Lubricate lever pivoting points if necessary.
Side stand • Make sure that operation is smooth.
• Lubricate pivot if necessary.
Chassis fasteners • Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
Instruments, lights, signals and switches • Check operation
• Correct if necessary