We suggest that you use assistance level 1 when using the
bicycle for sports.
• Level 0 indicates that assistance is disabled.
5. Hands-free assistance on the LCD display
Press and hold the "+" button to use the "assisted start" function to
make start-up easier. When the starting help is used, the assistance
does not exceed 6 km/h. The LCD screen will then display "6 KM"
above the speedometer.
As soon as the "+" button is released, the start-up help stops.
6. Setting the LCD display
To access the setting menu, press the "SET" button for 3 seconds. The
SET icon flashes and setting 0 is selected. Settings:
• 0: assistance mode. The selected mode is indicated by the icon
☑. 3 modes are available: ECO to optimise battery life,
POWER to optimise performance, NORMAL for a balance
between battery life and performance. Select your mode using
the "+" and "-" buttons. Then press SET to move to the next
setting.
• 1: odometer reset 1. Press "-" to reset it to 0. Then press SET
to move to the next setting.
• 2: maximum assistance speed limiter. It can be adjusted from
10 to 25 km/h using the "+" and "-" buttons. Then press SET to
move to the next setting.
• 3: wheel diameter selection. You can select your wheel
diameter from 16'' to 28'' using the "+" and "-" buttons. Then
press SET to move to the next setting.
RECOMMENDATION: adjusting the wheel diameter has
an impact on the safety and life of your bike. Never select
a different diameter from that installed on your bicycle. If
in doubt contact your retailer.
To Next Page
Loading...
