EasyManua.ls Logo

wayscral TAKEAWAY E-200 - User Manual

wayscral TAKEAWAY E-200
356 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Vélo à assistance électrique TAKEAWAY E-200
NOTICE D’UTILISATION
FR ......... 3
EN ...... 46
DE ...... 87
ES ..... 132
IT ...... 174
NL ..... 217
PL ..... 259
PT ..... 304
Code : 2210554

Table of Contents

Questions and Answers

  • C
    carolyn36Aug 1, 2025
    Why does my wayscral TAKEAWAY E-200 Bicycle engine not provide pedal assistance after switching it on?
    • K
      Kristin LozanoAug 1, 2025
      The lack of pedal assistance could stem from several reasons. First, verify that the battery is adequately charged. If the battery is charged, then a loose engine cable (waterproof connection joint), an incorrectly positioned brake lever, a blown battery fuse, an excessive distance of the speed sensor, or a faulty connection between the sensor and the controller could be at fault. To resolve this, ensure the engine cable connection is secure, the brake lever is correctly returned to its normal position, check the battery fuse (contact a professional for replacement if blown), adjust the speed sensor distance to be no more than 3 mm, and ensure the controller and sensor are properly connected.
  • C
    Charles FrancoAug 6, 2025
    What to do if my wayscral Bicycle battery life is shorter than expected?
    • J
      Julie LloydAug 6, 2025
      Reduced battery life can occur due to several factors. Insufficient charge time, low ambient temperature, frequent hills or headwinds, poor road conditions, inadequate tire pressure, frequent stops and starts, or prolonged storage without charging can all contribute. To address this, ensure the battery is fully charged as instructed. In cold temperatures (below 0°C), store the battery indoors. Note that difficult riding conditions naturally impact battery life. Maintain a tire pressure of 3.1 bar. Minimize frequent stops and starts, and regularly charge the battery. If issues persist, seek professional assistance.
  • C
    Connor MclaughlinAug 10, 2025
    What to do if after charging my wayscral TAKEAWAY E-200 for more than 4/5 hours, the charge indication LED is still red?
    • R
      rcostaAug 10, 2025
      If the charge indication LED remains red after charging, it could be due to high (40°C or higher) or low (0°C or lower) ambient temperatures, insufficient charging after use, or an inadequate output voltage. To fix this, charge the battery within the recommended temperature range and according to the instructions, maintain the battery correctly, and ensure the charging voltage is not lower than 100 V. If the issue persists, contact a qualified professional.
  • F
    franklindanielAug 14, 2025
    What to do if after connecting the charger, the charging LEDs do not light up on my wayscral Bicycle?
    • K
      Kurt ChapmanAug 14, 2025
      If the charging LEDs fail to illuminate upon connecting the charger, the problem might be with the electrical outlet, a faulty connection between the charger and the outlet, or a low ambient temperature. First, check the electrical outlet and repair if necessary. Then, ensure the plug is fully inserted. If the temperature is low, charge the battery indoors. If these steps do not resolve the issue, consult a qualified professional.
  • A
    Andrew CoxAug 19, 2025
    What to do if the red light does not work during charging my wayscral TAKEAWAY E-200 Bicycle?
    • C
      Christopher CookAug 19, 2025
      Check that the connectors are properly connected and that the nominal voltage is correct. If the voltage is correct, check the condition of the charger. If the charger is in good condition, the battery is likely defective.
  • M
    Mary HunterAug 23, 2025
    What to do if the red light immediately turns green on my wayscral TAKEAWAY E-200?
    • J
      Jonathan WashingtonAug 23, 2025
      Verify that the battery is fully charged. If the battery isn't fully charged, it indicates a fault with either the battery or the charger.
  • E
    Emily WatsonAug 27, 2025
    What to do if the red light does not turn green on my wayscral TAKEAWAY E-200 Bicycle?
    • T
      Timothy HaydenAug 27, 2025
      Turn off the power. After 5 seconds, reconnect the power supply so the charger can continue charging. If the battery still doesn't charge, the battery is likely defective.

Summary

Structure of the Power-Assisted Bicycle

Initial Setup and Adjustments

Covers first use, folding, quick release, stem/seat, handlebars, safety elements, and battery charging.

Quick Release System Operation

Details on using the quick release system for folding and secure component attachment.

Stem and Seat Adjustment

Procedures for folding the stem and adjusting the saddle height, including safety checks.

Handlebar Adjustment

Instructions on adjusting the height and tilt of the bicycle handlebars.

Battery Charging Procedure

Steps for safely charging the bicycle battery before use, including pre-requisites.

Safety Elements: Lighting and Bell

Details on the bicycle's lighting system, bell, and mandatory helmet usage for children.

Quick Start Guide

Instructions for powering on the bicycle and initiating assisted pedaling for the first time.

Bicycle Settings and Adjustments

Covers essential adjustments like tyre pressure, brakes, gears, wheel rims, chain, pedals, wheel/engine, luggage rack, and kickstand.

Tyre Pressure and Brake System

Guidance on maintaining correct tyre pressure and operating/adjusting the mechanical disc brake system.

Wheel Rim Wear and Replacement

Information on checking wheel rims for wear and the importance of replacing damaged rims for safety.

Gear Shifting System Adjustment

Guide to adjusting the bike's gears using the shifter and understanding limit screw functions.

Limit Screw Adjustment for Derailleur

Instructions on how to adjust the derailleur's range of movement using H and L limit screws.

Rear Derailleur Cable Tension

Procedure for adjusting the rear derailleur cable tension for proper gear shifting.

Chain Adjustment and Replacement

Information on chain tension, replacement, and proper installation with quick clamps.

Folding Pedal Replacement

Instructions on how to identify and replace the bicycle's folding pedals correctly.

Wheel and Engine Maintenance

Advice on tightening wheel spokes after initial use and normal engine operation sounds.

Luggage Rack Installation and Use

Details on the luggage rack's specifications, load capacity, and safety guidelines for its use.

Kickstand Check

Guidance on checking the bicycle's kickstand before each use for proper functionality.

Bicycle Maintenance Procedures

Cleaning and Lubrication

Instructions for cleaning, lubricating, performing regular checks, and tightening components.

Scheduled Servicing Intervals

Information on service intervals, including the first service checklist and annual/triennial maintenance.

Understanding Power Assistance

Pedalling Assistance and LED Display

How pedalling assistance works, LED display functions, battery charge indication, and selecting assistance levels.

Battery Management and Care

Battery Operation and Lifespan

Covers reading charge levels, on/off switch, battery life factors, installation, removal, and precautions.

Battery Ageing, Disposal, and Maintenance

Information on battery ageing, proper disposal, and essential maintenance guidelines for longevity.

Charger Usage and Safety

Charger Warnings and Precautions

Safety warnings for the charger and step-by-step instructions for charging the battery.

Electric Engine Operation and Care

Engine Usage and Maintenance

Guidelines for operating the electric engine, including startup behavior and precautions against damage.

Controller System Care

Controller Protection and Warnings

Instructions for protecting the controller from water, handling precautions, and warnings against modifications.

Electrical Diagram and Specifications

Electrical Diagram and Connections

Visual representation of the electrical system, detailing component connections.

Main Technical Specifications

Key technical data for the bicycle, including weight, speed, battery, motor, and dimensions.

Troubleshooting and After-Sales Support

Wear and Tear, Basic Troubleshooting

Information on wear parts and basic troubleshooting advice, emphasizing professional repair for electrical issues.

Troubleshooting Charger Issues

Common problems with the charger's LED indicators and solutions, including fuse replacement.

wayscral TAKEAWAY E-200 Specifications

General IconGeneral
TypeElectric Bicycle
Motor positionRear Hub
Frame TypeStep-Through
Frame MaterialAluminum
Wheel Size20 inches
Tire TypePuncture-resistant
Brake TypeV-Brakes
Maximum Load Capacity120 kg
FoldableYes
Color OptionsWhite, Black
Weight22 kg
Gear System6-speed

Related product manuals