D. Battery
I. Reading the battery charge level
To find out your charge level, press the charge button on the top of your
battery once, beneath the seat. The LEDs light up to indicate the
charge status, then go out after 4 seconds (4 LEDs = 100%, 3 LEDs =
70%, 2 LEDs = 50%, 1 LED = < 20%).
II. Switching the battery on/off
To turn on your battery, press the red "ON/OFF" button, located on the
top of the battery. Press it again to turn it off. When your battery is off,
it no longer provides power to your bicycle. However, the battery
charge display remains functional.
III. Battery life
This power-assisted bicycle is fitted with a high quality Li-ion battery.
Li-ion batteries do not have a charge memory and have a wide
temperature tolerance ranging from -10 to 40°C.
To ensure maximum battery life and protect it from damage, please
follow the use and care instructions below.
Once your battery is charged, it is recommended that you leave it for
20 to 30 minutes before use.
Your battery life depends on several usage factors:
• the assistance mode selected
• the weight of the rider
• the elevation of the road
To Next Page
Loading...
