When your battery is off, it no longer supplies electricity to your bike,
however the battery charge display remains functional.
3. Inserting/removing the battery
The battery on electric bikes is placed on the rear luggage rack and is
directly connected to the control unit at the front.
WARNING: before handling the battery, make sure the
switch is in the off position.
To install the battery, first slide the battery pack horizontally along the
rail, while pressing down on it to make sure it is securely in place, then
lock.
To lock, insert the key into the lock and turn it clockwise by half a turn
(the battery and luggage rack are then locked). You can unlock the
battery with half a turn anti-clockwise.
To Next Page
Loading...
