WBOX Technologies 0E-HD4MP28DM - Reset; Save-Exit; Exit

To Previous Page

Operation Guide

Issue V1.0 (2019-05-08)

2.7 RESET

Press the UP or DOWN button to select RESET, and press the SET button to reset the camera OSD

parameter.

2.8 SAVE-EXIT

Press the UP or DOWN button to select SAVE-EXIT, and press the SET button to save the OSD

settings and return to the camera's real-time video interface.

2.9 EXIT

Press the UP or DOWN button to select EXIT, and press the SET button to discard the OSD settings

and return to the camera's real-time video interface.