Step 4 Press the UP or DOWN button to select EXPOSURE MODE and press the LEFT or
RIGHT button to select a exposure mode.
The exposure mode includes GLOBE, and BLC.
− BLC: Press the LEFT or RIGHT button to select BLC, press the LEFT or RIGHT
button to adjust BLC value. The default BLC is 5 and the setting range is 1-9.
− GLOBE: Press the LEFT or RIGHT button to select BLC.
Step 5 Press the UP or DOWN button to select RETURN and press the SET return to the OSD
main menu interface.
----End
2.2 AWB
White balance is intended to reproduce the actual colors of the observed scene when the illuminance
and color temperature of the target object are changed. You can set WB to ATW or MWB.
Procedure
Step 1 Press the UP or DOWN button to select AWB. Press the SET button to open the WB
interface, as shown in Figure 2-2.
Figure 2-2 AWB interface
Step 2 Press the LEFT or RIGHT button to set the MODE. The options are ATW and MWB. The
default mode is GRAY WORLD
When MWB mode is selected, you can set white balance parameters, as shown in Figure 2-3.
To Next Page
Loading...
Need help?
General