Webasto BlueCool S Series - Page 13

BlueCool S Series 4 Information on Unit
9
*1 BTU/h and electrical data are based on 7 °C evaporation temperature and 38 °C condensation temperature
*2 Amperage values for core unit depending on compressor load. Maximum values under tropical conditions at 230V/50Hz.
*3 Starting amperage RMS (Root Mean Square) for core unit for the first 300 ms
*4 Starting amperage RMS (Root Mean Square) for core unit for first 40 ms
*5 Air flow free blowing
*6 Recommendation only. The pump size shall be adapted to the application in order to always ensure minimal sea water flow.
Minimum distance
(recommended dis-
tance), at front
Also see Fig. 5.
40 (100)
Minimum distance
(recommended dis-
tance), at rear.
Also see Fig. 5.
20 (150)
Minimum distance
(recommended dis-
tance), at top.
Also see Fig. 5.
50 (100)
ø of air outlet
[mm] - [inches]
100 - 4” 125 - 5” 2x 125 - 2x 5”
Min. ø of air duct
[mm] - [inches]
100 - 4” 125 - 5” 2x 125 - 2x 5”
Supply air grille [cm
2
] 235 250
390
650
Return air grille [cm
2
] 490 550
800
1,600
Refrigerant quantity
R410a [g]
250
280
380
400 580
670
Min. sea water tem-
perature in heating
mode [°C]
6
Max. sea water tem-
perature in cooling
mode [°C]
35
Model S8-R-230V-
REV-R410a
S10-R-230V-
REV-R410a
S13-R-230V-
REV-R410a
S16-R-230V-
REV-R410a
S20-R-230V-
REV-R410a
S27-R-230V-
REV-R410a