SWITCHING ON AND OFF
Switching on:
Pull the On/Off trigger upwards.
Switching off:
Release the On/Off trigger.
ADJUSTING THE CUTTING ANGLE.
Push the Rotating Knob (7) and then rotate the shaft to a comfortable position and release the
button, once you hear the ‘click’ sound. Totally has 3 levers.
EDGE CUTTER.
In order to use the grass trimmer as an edge cutter, use the settings as follows:
Disconnect the mains plug, Push the rotating knob (5) on the motor housing, and then rotate
the housing to the edge position.
Rotate the edging knob button, ensuring the motor housing section firmly clicks to secure in
place as it audibly snaps into position.
Now the trimmer can be used as the edge cutter.
To Next Page
Loading...