Weber Rescue Systems SPS 270 MK2 E-FORCE 2 - Operating E-FORCE 2 Devices

4.4OperangE-FORCE2devices
Tostartthebaerytool,presstheon/oswitch.Theswitchisilluminatedwhite,theLEDsstarttolightup,
andthemotoridles.Inthisstate,ifthetoolisnotoperatedusingthecontrolleveronthecontrolhandle,it
switchesoautomacallyaer30secondsandmustthenberestarted.
Themovementspeedcanbepreciselycontrolledbypressingwithgreaterorlesserforceonthecontrol
lever.Themaximumcung,spreadingorcompressiveforceisreachedonlyiftheleverispushed
completely through.

Thetools’maindireconofmovementistriggeredbypressingtherockerswitchtothelewithyourindex
nger(groovedsideoftherockerswitch).

Theoppositedireconistriggeredbypressingthecontrolrockertotherightwithyourthumb(curvedside
oftherockerswitch).

Whentherockerswitchisreleased,itreturnstothezeroposionautomacally.Thisalwaysbringsthetool
toastopinanysituaon,includingunderload.Aer30seconds,thetoolswitcheso.
 
 

