EasyManua.ls Logo

Weber Rescue Systems SPS 270 MK2 E-FORCE 2 - Changing the Spreader Tips (SP 35 AS, SP 53 BS, SPS 370, SPS 400)

Default Icon
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.7 Changingthespreaderps(SP35AS,SP53BS,SPS370,SPS400)
Thespreaderpsaresecuredinthespreaderarmswithremovablecollarstuds(withthe
exceponoftheSP35ASandtheSP53BS).Inordertochange,pressoutthestudssecured
byaspring-loadedball.Afterchangingtheps,pushthecollarstudsbackinagain.When
doingthisensurethatthestudsarecorrectlyed(completelypressedin).
Fingthebracketforthechainsetisidencal.Thechainlockmustbeedwiththelock
facingupwards.
ThecollarstudsontheSP53spreaderpscanbepressedoutofthespreaderarmsbuthavea
safetysystemtopreventthembeinglostandsotheycannotbeseparatedfromtheps.
TheSP35ASspreaderpsarenotsecuredwithremovablecollarstudsbutratherwitha
tensioningpinthatmustbeknockedoutwhenthepsarebeingchanged.Thechainsetcanbe
fastenedinaseparateholewithouthavingtoremovethepsbeforehand.


Table of Contents

Related product manuals