Weber Rescue Systems SPS 270 MK2 E-FORCE 2 - Page 32

  Next,thecuerisrotatedandthebladeinsertisplaced
  inthecuerbladewithnoinsert.Wheninserng,make
sure that the blade insert does not twist.
  Ifthebladeinsertscannotbeinsertedbyhand,usethe
  so-headhammer(seegure3).
Fig.3
  Therollpinsarelocatedusingapunchandlightblows
  ofahammerfromaboveintotheposionholes
  providedforthispurpose.Rollpinsshouldbepushed
  intoposionunlTheyareushwiththetopsurface
  oftheblade(seegure4).
Fig.4
