Weber IGRILL 2 - Renaming Probes; Timer Tool

iDevices, LLC iGrill
2
User Manual
v1.0
11
11
Creating a custom preset alarm:
• Tap “Create New”.
• Name your preset under “Alarm Title”.
• Set temperature(s).
• Tap “Save”.
NOTE:
• Your custom preset will be saved in the “My Peak Presets” and “My
Range Presets” sections of the alarm screen.
• The iDevices Connected app will not display temperatures below -22°F
(-30°C) or above 572°F (300ºC).
• When your target temperature has been reached, the iGrill
2
will produce
an audible tone and the iDevices Connected app alarm will alert you
with a notification.
• When a temperature reading goes outside your target range, the iGrill
2
will produce an audible tone and display “DC” or “DH” (indicating a
temperature that is below or above range, respectively) and the iDevices
Connected app alarm(s) will alert you.
4.5 Renaming Probes
A probe can be renamed by tapping the number of the probe to the left of the
running temperature.
4.6 Timer Tool
Create a new timer:
• Under “More” located at the bottom of the screen tap the “Timers” icon.
• Tap “Create New” to create a new timer.
• Add a timer title.
• Set desired time length using scroll wheels.
• Tap “Save” to save the timer for future use.
• Swipe the timer on to begin counting down.