3.3 Powering On & Off
To turn on the iGrill
2
, follow these steps:
• Press the power button located at the bottom of the faceplate between
the < and > buttons.
• The iGrill
2
’s display will animate, and a single beep will be heard,
indicating it has powered on.
To turn off the iGrill
2
, follow these steps:
• Press and hold down the power button located at the bottom of the
faceplate between the < and > buttons for 3 seconds. The display will
show “OFF”.
• Upon releasing the power button, the iGrill
2
will turn off.
Auto Shut-Off
• The iGrill
2
will stay powered on for 5 minutes before automatically
turning off if there are no probes installed and it is not connected to a
smart device.
• The iGrill
2
will stay powered on for 8 hours before automatically turning
off if not paired to a smart device and probes are installed.
• The iGrill
2
will stay powered on until the battery is depleted if at least 1
probe is installed and it is paired with a smart device.
3.4 Connecting
To connect your iGrill
2
to your iPad, iPhone or iPod touch, follow these steps:
• Open Settings
• Tap Bluetooth
• Set Bluetooth to On
• While turned on, place your iGrill
2
next to your Apple device and open
the iDevices Connected app. Your device will automatically recognize
any available iGrill
2
devices and display them in the device list. You can
view your device list by tapping the iDevices logo at the top of the app.
• Select your iGrill
2
from the device list menu. You will then be sent a
pairing request. When you accept, your device will pair with the iGrill
2
and you are ready to configure your settings and start grilling!
To Next Page
Loading...
