Weber IGRILL 2 User Manual

iDevices, LLC iGrill
2
User Manual
v1.0
9
9
4. Using the iGrill
2
4.1 Display
The iGrill
2
’s display contains the following:
Display
• Displays temperature of currently active probe.
• Displays “DC” for temperatures below set range or below -22°F (-30ºC).
• Displays “DH” for temperatures above set range or above 572°F (300ºC).
• Displays “OFF” during power off sequence.
• Animates during power on sequence and during reset.
Bluetooth LED
• Blinks blue when discoverable and awaiting pairing.
• Illuminates solid blue when paired.
Probe Indicator LEDs
• Far left side LED illuminates to indicate Probe 1 temperature being
displayed.
• Middle left side LED illuminates to indicate Probe 2 temperature being
displayed.
• Middle right side LED illuminates to indicate Probe 3 temperature being
displayed.
• Far right side LED illuminates to indicate Probe 4 temperature being
displayed.
4.2 Probe Toggle Buttons
The iGrill
2
has two buttons adjacent to the power button to toggle between
probes when there is more than one probe connected.
• Pressing the < or > button will switch from the currently displayed probe
temperature (as indicated by the illuminated probe indicator LED) to the
next probe temperature in that direction.
• Holding either the < or > button down for 1 second will activate a cycle
that will continuously cycle through displaying each probe’s
temperature.
• Pressing the <, >, or power button while the alternating display cycle is
activated will disable the display cycle.

Weber IGRILL 2 Specifications

General

Battery life	200 h
Battery type	AA
Number of batteries supported	2
Type	Digital
Bluetooth	Yes
Display type	LED
Product color	Black, Red
Bluetooth version	4.0
Necessary application	Weber iGrill
Temperature range (T-T)	-50 - 380 °C
Temperature measurement units	F, °C

Weight and Dimensions

Depth	55.9 mm
Width	81.3 mm
Package depth	226.1 mm
Package width	182.9 mm
Package height	68.6 mm