5
Battery Replacement
To replace your iGrill 3 batteries, follow these steps:
• Locate the battery pack mounted underneath, and to the rear, of the
right side table of your grill.
• Separate the battery pack from its mounting bracket by gently
pulling it forward.
• On the back of the battery pack, press down on the tab and remove
the battery door.
• Replace the three AA batteries with their negative terminals
compressing the springs and replace the battery door.
• Snap the battery pack into the mounting bracket under the side
table of your grill.
Battery Precautions:
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon zinc) or rechargeable (ni-cad,
ni-mh, etc.) batteries.
• Dispose of spent or damaged batteries according to manufacturer
instructions and local laws.
Powering On & Off
To turn the iGrill 3
on, follow these steps:
• Press the power button located at the front of the faceplate.
• The display will ash, and a single beep will be heard, indicating
that the iGrill 3 has powered on.
To turn the iGrill 3
off, follow these steps:
• Press and hold down the power button located at the front of the
faceplate for several seconds. A double beep will be heard.
• Upon releasing the power button, the iGrill 3 will turn off.
To Next Page
Loading...
Need help?
General
