9
Probe Wrap Use
To wrap your probe(s):
• Hold the probe wrap so that the clip segment is on the bottom left
and the logo is legible in the center of the probe wrap.
• Snap the probe into the probe wrap’s clip, ensuring that the probe’s
body follows the contour of the probe wrap and leaves a ½ inch gap
between the probe and the wire channel of the probe wrap. The tip
of the probe should be pointed downward.
• Wrap your probe’s wire clockwise around the probe wrap.
• When you reach the adapter end of the probe wire, it can be
inserted into the probe wrap’s wire channel to secure the wrapping.
Using the iGrill 3
Display
The display of the iGrill 3
contains the following:
Bluetooth
®
LED
• Blinks blue when discoverable and awaiting pairing.
• Illuminates solid blue when paired.
Proximity Sensor
The use of Bluetooth
®
Smart allows the iGrill 3 to sense when a paired
smart device moves in or out of range. The iGrill 3 will automatically wake
and sleep at the following distances to conserve power:
• Sleep ~ 30 feet away.
• Wake ~ 5 feet away.
*Proximity function based on Bluetooth
®
signal strength. Signal strength
is inuenced by a number of factors including the smart device
and environment, such as the walls and oors of your home.
To Next Page
Loading...
Need help?
General
