Weber SLATE - Premium Griddle

Igniting your
Weber
®
Slate
Premium Griddle
• Preheating the griddle for 10 - 15 minutes
is critical to successful cooking. It helps
prevent food from sticking, and ensures
the griddle is hot enough to properly cook
your food. It also helps burn off any residue
of a previously cooked meal.
• Each control knob operates an
individual burner, and each burner ignites
independently. Ignite the burners starting
from left to right. All burners should be lit
for preheating, however, all burners do not
have to be lit while cooking.
Ensure all controls are in the
OFF position before turning
on the gas.
Preheat the griddle on high
for 10-15 minutes, once
preheated you can adjust the
burners as desired
depending on what’s
cooking.
Do not operate the
barbecue with the hard
cover closed.
IGNITING
ESSENTIALS
Setting up your Weber
®
Slate Premium Griddle
PREHEAT THE GRIDDLE
USING THE SNAP IGNITION
SYSTEM TO IGNITE BURNERS
IGNITING THE SIDE BURNER
• Open the side burner lid. Push in and turn
the side burner control knob anticlockwise
to start/high position. Push the red igniter
button several times, so it clicks each
time. Once the side burner is ignited,
continue turning the knob anti-clockwise
until you reach the desired position.
8
Quick-Start Guide