Weber SMOKEFIRE EX4 - Hopper Management After Jam Clear

23
TROUBLESHOOTING
P
Q
R
1
2
3
4
S
weber.com
16. Push the hopper slide door closed (P).
17. Open the hopper lid and fill the hopper with your choice of WEBER
SMOKEFIRE ALL NATURAL HARDWOOD PELLETS (Q).
18. Open the grill lid and install the pellet slide using a Phillips screwdriver
(R).
NOTE: Make sure the auger tube is inserted through the pellet slide opening
before securing hardware.
19. Reinstall the heat bae, heat diuser, FLAVORIZER bars and cooking
grates inside the cookbox. (S).
20. Plug in, power on the grill, and begin a cook to allow the controller to run
diagnostics. If the E1 error code still remains on the controller, contact
the Customer Service Representative in your area using the contact
information on our website.