Weber SMOKEFIRE EX6 User Manual (English)

Other manuals for Weber SMOKEFIRE EX6

Questions and Answers:

R
Rita CampbellAug 20, 2025
What to do if my Weber SMOKEFIRE EX6 is too hot?
- M
  Margaret ThompsonAug 20, 2025
  If your Weber Grill is overheating, follow these steps: 1. Allow the barbecue to complete the shutdown procedure and cool down completely. Keep the lid closed and do not unplug or power it off during this process. 2. Once cool, power off the grill and unplug it. 3. Open the lid and remove the cooking grates, FLAVORIZER BARS, heat diffuser, and heat baffle. 4. Clean the cookbox and burn pot of ash and debris, directing it into the ash and grease system. Ensure the ash is fully extinguished before cleaning. 5. Reinstall the heat baffle, heat diffuser, FLAVOURISER bars, and cooking grates. 6. Clean the ash and grease system, reinstall the drawer, and replace drip pans if needed. 7. Plug the grill back in and power it on.
J
James RhodesAug 25, 2025
What to do if my Weber SMOKEFIRE EX6 displays E1 error?
- K
  Kimberly PinedaAug 25, 2025
  If your Weber Grill displays an E1 error, it indicates an auger jam. The grill will attempt to clear the jam automatically. If the grill is still hot, it will run the shutdown procedure, so open the lid and wait until it has cooled completely. Do not unplug the grill during this process. Once cooled, power off the grill and unplug it. Remove the cooking grates, FLAVORIZER bars, heat diffuser, and heat baffle. Clean the cookbox and burn pot of any ash or debris. Reinstall the heat baffle, heat diffuser, FLAVORIZER bars, and cooking grates. Clean the ash and grease system, reinstall the drawer, and replace grease drip pans if needed. Finally, plug the grill back in and power it on.
J
Joshua AndersonAug 26, 2025
What does E3 error mean on my Weber SMOKEFIRE EX6 Grill and how to fix it?
- J
  Jonathan ParksAug 27, 2025
  An E3 error on your Weber Grill indicates that the grill flame is out. The grill will automatically start the shutdown procedure if it's still hot, so open the lid and allow it to cool completely without unplugging it. Once the shutdown is complete, power off the grill and unplug it from the power source. Remove the cooking grates, FLAVORIZER bars, heat diffuser, and heat baffle from the cookbox. Clean any ash or debris from the cookbox and burn pot. Then, reinstall the heat baffle, heat diffuser, FLAVORIZER bars, and cooking grates. Clean the ash and grease system, reinstall the drawer, and replace the grease drip pans as needed. Finally, plug the grill back into the power source and power it on to begin cooking.
G
Gabriel CarrollAug 30, 2025
What does E4 error mean on my Weber SMOKEFIRE EX6?
- M
  Madison NguyenAug 30, 2025
  The E4 error code on your Weber Grill indicates a communication failure. If the grill is still hot, it will automatically run the shutdown procedure. Open the grill lid and wait until the grill has completed the shutdown procedure and completely cooled. Do not unplug the grill during this process. Once the shutdown procedure is complete, power off the grill and unplug it from the power source. Wait one minute, then plug the grill back in and power it on to begin your cook.
G
George VelezSep 3, 2025
What does E7 error mean on my Weber SMOKEFIRE EX6 Grill?
- K
  Kimberly BeltranSep 3, 2025
  The E7 error on your Weber Grill indicates a motor failure. If the grill is still hot, it will automatically run the shutdown procedure. Open the grill lid and wait until the grill has completed the shutdown procedure and completely cooled. Do not unplug the grill during this process.
R
Rebecca WilliamsSep 5, 2025
What does E9 error mean on my Weber SMOKEFIRE EX6 Grill?
- V
  Victoria WheelerSep 5, 2025
  The E9 error on your Weber Grill indicates a low fuel detection error. If the grill is still hot, it will automatically run the shutdown procedure. Open the grill lid and wait until the grill has completed the shutdown procedure and completely cooled. Do not unplug the grill during this process.
J
Jose PhillipsSep 7, 2025
What does E8 error mean on my Weber Grill?
- C
  Cory WiseSep 7, 2025
  The E8 error code on your Weber Grill indicates a thermocouple error. If the grill is still hot, it will automatically run the shutdown procedure. Open the grill lid and wait until the grill has completed the shutdown procedure and completely cooled. Do not unplug the grill during this process.
M
Michael LopezSep 9, 2025
What to do if my Weber SMOKEFIRE EX6 Grill shows E1 error?
- M
  Melissa KingSep 9, 2025
  An E1 error on your Weber Grill indicates an auger jam. The grill will attempt to clear it automatically. If that doesn't work: 1. Allow the barbecue to complete the shutdown procedure and cool down completely. Do not unplug or power it off during this process. 2. Once cool, power off the grill and unplug it. 3. Remove the cooking grates, FLAVORIZER BARS, heat diffuser, and heat baffle. 4. Clean the cookbox and burn pot of ash and debris, directing it into the ash and grease system. Ensure the ash is fully extinguished before cleaning. 5. Reinstall the heat baffle, heat diffuser, FLAVORIZER bars, and cooking grates. 6. Clean the ash and grease system, reinstall the drawer, and replace drip pans if needed. 7. Plug the grill back in and power it on.