SIDE BURNER TABLE ASSEMBLY
REPLACEMENT INSTRUCTIONS
61621 09/12/12
THIS PROCEDURE SHOULD ONLY BE PERFORMED BY AN AUTHORIZED
WEBER-STEPHEN PRODUCTS LLC SERVICE TECHNICIAN
WARNING: GENUINE WEBER-STEPHEN REPLACEMENT PARTS MUST BE USED FOR ANY REPAIR OR REPLACEMENT.
YOUR ACTIONS, IF YOU FAIL TO FOLLOW THIS PRODUCT WARNING, MAY CAUSE A FIRE, AN EXPLOSION, OR
STRUCTURAL FAILURE RESULTING IN SERIOUS PERSONAL INJURY OR DEATH AS WELL AS DAMAGE TO PROPERTY.
(WILL VOID ALL WARRANTY PROTECTION.)
DANGER: BEFORE PERFORMING ANY WORK MAKE SURE THE GAS SUPPLY IS TURNED OFF AT THE SOURCE.
FAILURE TO FOLLOW DANGERS, WARNINGS AND CAUTIONS CONTAINED IN THIS INSTRUCTION SHEET MAY CAUSE A
FIRE OR AN EXPLOSION RESULTING IN SERIOUS PERSONAL INJURY OR DEATH AS WELL AS DAMAGE TO PROPERTY.
BEFORE STARTING: Make sure lid is closed and casters are
locked to prevent grill from moving.
NOTE: Grills illustrated may differ slightly from model purchased.
SIDE BURNER
TABLE ASSEMBLY
REPLACEMENT
AT
SIDE BURNER
TABLE LID
REPLACEMENT
SIDE BURNER
ASSEMBLY
REPLACEMENT
SIDE BURNER
ELECTRODE
REPLACEMENT
To Next Page
