EasyManua.ls Logo

Weber Spirit E-210 - User Manual

Weber Spirit E-210
144 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
845CN-0003
0845
YOU MUST READ THIS OWNER’S GUIDE BEFORE
OPERATING YOUR GAS GRILL.
m DANGER
If you smell gas:
1) Shut off gas to the appliance.
2) Extinguish any open flames.
3) Open lid.
4) If odour continues, keep away from the appliance and
immediately call your gas supplier or your fire service.
Leaking gas may cause a fire or explosion which can cause
serious bodily injury, death, or damage to property.
m WARNING
1) Do not store or use petrol or other flammable liquids or
vapours in the vicinity of this or any other appliance.
2) A gas supply cylinder not connected for use shall not be
stored in the vicinity of this or any other appliance.
m WARNING: Carefully follow
all leak-check procedures
in this Owner’s Guide prior
to grill operation. Do this
even if the grill was dealer-
assembled.
m WARNING: Do not ignite
this appliance without
first reading the BURNER
IGNITION sections of this
Owner’s Guide.
58541
EN_ASIA  INTERNATIONAL ENGLISH
11/01/15
OUTDOOR USE ONLY.
NOTICE TO INSTALLER: These
instructions must be left with
the owner, who should keep
them for future use.
GRILL OWNER’S GUIDE
Thank you for
purchasing a
Weber
™
grill.
Takea few minutes
and protect it by
registering your
product online at
www.weber.com.
E-210
™
· E-310
™
· S-320
™
LPG

Table of Contents

Other manuals for Weber Spirit E-210

Preview: Assembly Instructions
Assembly Instructions8 pages
Preview: User Guide
User Guide40 pages
Preview: Owner's Manual
Owner's Manual40 pages

Questions and Answers

  • P
    paulbellJul 30, 2025
    What to do if Weber Grill burners do not light?
    • M
      Matthew HoltJul 30, 2025
      To reset the excess flow safety device on your Weber Grill, turn all burner control knobs and the cylinder valve to OFF. Disconnect the regulator from the cylinder. Turn burner control knobs to HI. Wait at least 1 minute. Turn burner control knobs to OFF. Reconnect the regulator to the cylinder. Turn the cylinder valve on slowly. Refer to “Lighting Instructions”. This issue may occur if the excess flow safety device, which is part of the barbecue to cylinder connection, has been activated.
  • W
    weberwilliamAug 5, 2025
    Why Weber Spirit E-210 burner does not light?
    • D
      dawn38Aug 6, 2025
      If the burner does not light, or the flame is low in the HI position on your Weber Grill, first check if the LP fuel is low or empty and refill the LP cylinder if needed. Also, inspect the fuel hose for any bends or kinks and straighten it. If you can light the Left burner with a match, then check the Crossover® ignition system.
  • T
    Tina MyersAug 11, 2025
    Why is my Weber Grill experiencing flare-ups?
    • S
      Stephanie SavageAug 11, 2025
      Flare-ups on your Weber Grill can occur if you are not preheating the barbecue correctly. Ensure all burners are on high for 10 to 15 minutes for preheating. Also, clean the cooking grates and Flavorizer® bars thoroughly if they are heavily coated with burned-on grease. Finally, make sure the bottom tray is clean to allow grease to flow into the catch pan.
  • S
    Sheila JohnsonAug 17, 2025
    Why is the inside of my Weber Grill lid peeling?
    • M
      millermollyAug 17, 2025
      The residue inside the lid of your Weber Grill is likely baked-on grease that has turned to carbon and is flaking off. This is not a defect. Clean the lid thoroughly.
  • M
    Matthew AndrewsAug 23, 2025
    What to do if Weber Spirit E-210 burner flame pattern is erratic?
    • D
      Donald MorganAug 23, 2025
      If the burner flame pattern on your Weber Grill is erratic, with a low flame when the burner is on HI, and flames do not run the whole length of the burner tube, the burners may need to be cleaned. Clean the burners. See Section “Maintenance”.

Summary

Safety Precautions

Danger: If you smell gas

Instructions for immediate actions to take if you smell gas to prevent fire or explosion.

Warning: Flammable materials and storage

Warning: Leak-check and ignition

Emphasizes the importance of performing leak checks and reading ignition instructions before operation.

LP Gas and Connections

Safe Handling of LPG Cylinders

Provides crucial safety guidelines for handling LPG cylinders.

LPG Cylinder and Regulator Requirements

Details specifications for LPG cylinders and regulator connections.

Storage of LPG Cylinders

Connecting the Regulator

Regulator Connection Methods

Details various methods for connecting the regulator to the LPG cylinder.

Checking for Gas Leaks

Leak Check Procedure

Step-by-step instructions for performing a soap-and-water leak test on gas connections.

Leak Check and Reassembly

Checking Specific Connections

Details checking regulator, manifold, and side burner connections for leaks.

Pre-Use Safety Checks

General Safety First

Emphasizes safety before grilling and lists general appliance warnings.

Grease Tray and Catch Pan Maintenance

Instructions for cleaning the grease tray and catch pan to prevent fires.

Hose Inspection

Details how to inspect the gas hose for damage before each use.

Main Burner Ignition and Usage

Electronic Ignition Procedure

Step-by-step guide for igniting main burners using the electronic system.

Main Burner Match Ignition

Match Ignition Procedure

Step-by-step guide for igniting main burners using a match.

Extinguishing Main Burners

Side Burner Ignition and Usage

Side Burner Ignition with Igniter

Detailed steps for igniting the side burner using the electronic igniter button.

Side Burner Match Ignition

Match Ignition Procedure for Side Burner

Step-by-step guide for igniting the side burner using a match.

Extinguishing the Side Burner

Troubleshooting Common Issues

Main Burner Troubleshooting

Addresses common problems with main burner ignition, flame, and temperature.

Side Burner Troubleshooting

Provides solutions for issues related to side burner ignition and flame.

Annual Maintenance

Maintaining Grill Performance

Burner Flame and Screen Checks

Details checking burner flame patterns and spider/insect screens for obstructions.

Burner Tube Port Issues

Burner Tube Cleaning and Removal

Preparing for Burner Tube Service

Control Panel and Manifold Removal

Burner Tube Removal Procedures

Removing Tubes (2-Burner Models)

Removing Tubes (3-Burner Models)

Cleaning Burner Tubes

Cleaning Inside Burner Tubes

Cleaning Outside Burner Tubes

Reinstalling Burner Tubes

Reinstalling Tubes (2-Burner Models)

Reinstalling Tubes (3-Burner Models)

Ignition System Maintenance

Maintaining the Electronic Ignition

Steps for maintaining the electronic ignition system, including battery and wire checks.

Side Burner Tube Maintenance

Cleaning the Side Burner Tube

Procedures for cleaning and reinstalling the side burner tube and valve.

Side Burner Maintenance Checks

Weber Spirit E-210 Specifications

General IconGeneral
Main Burners2
Dimensions - Lid Open63"H x 50"W x 32"D
Dimensions - Lid Closed45.5"H x 50"W x 24"D
BTU-per-hour Input26, 500
Side Tables2
Tool Hooks6
Burner MaterialStainless steel
Fuel TypeLiquid Propane
Cooking GratesPorcelain-enameled, cast iron
Total Cooking Area450 square inches
Ignition SystemElectronic Crossover® Ignition System

Related product manuals