10
CELL SIGNAL BOOSTER (DIRECTIONAL/PANEL) OFFICE 200
ENGLISH
OPTIONAL: After powering up your system, you can optimize your system
to see if more performance is possible. Rotate the Outside Antenna in 1/3
turn increments, after each turn, unplug and reconnect the booster to
power while observing the signal level on your cell phone from the Inside
Antenna’s projected area. Secure the Outside Antenna in place, pointing in
the direction that gives you the strongest signal. Enjoy your boosted signal!
After each rotation, observe signal level
on your cell phone from the Inside Antenna’s
projected area. This is done best by having someone
near the inside antenna taking signal measurements
after the person outside makes each rotation.
______
(STEP 5 cont.)
To Next Page
Loading...
Need help?
General