WEGeuro - Indústria Eléctrica, S.A. Português - English
46
6.7 For the energy cable connection it’s recommended to use a copper cable end sleeve
on the end of the stripped cable, as represented in the following images:
For the clamp’s screws, it’s recommended to be used the following torque values:
A - Screws for tighten the
cable inside the clamp
B - Screws for tighten the
clamp to the bushing
6.8 Near each threaded hole in enclosures foreseen for conduit entries there’s a plate with
its dimensions and thread type.
To Next Page
Loading...
